Full color LED display size can the be customized?
Now many LED display manufacturers provide LED display customization services, as long as the customer provides the size area, installation site, environment, etc. However, in reality, the area of the LED display screen is not based on the specific requirements of the customer, but is slightly different. Why is this?
The LED display is spliced by a certain number of boxes, and the box is designed according to the number of modules, and the size of the module is fixed, so the size of the LED display can only be arbitrarily designed according to the size of the module. Display manufacturers generally design according to the size and area of the LED display provided by the customer, and can only try to reach your size without too much difference.
Here is an example: For example, the customer has now customized a P10 outdoor full-color display, the initial requirements are 25 meters long, 15 meters wide, and a total area of 375 square meters. The P10 outdoor full-color screen module has two sizes of 320mm*320mm and 160mm*160mm. Assuming that a 160mm*160mm module is used here, that is, a module with a length and width of 0.16 meters, the number of cabinets required to calculate the length and width are as follows:
The number of cabinets required for a long time: 25÷0.16=156.25
The number of boxes required for the width: 15÷0.16=93.75
Therefore, the size design plan for the customer is: select 156 modules for the length and 94 modules for the width, then the actual size of the P10 full-color display is:
Actual length: 156×0.16=24.96 meters
Actual width: 94×0.16=15.04 meters
Actual area: 24.96×15.04=375.3984 square meters
It is also worth noting that the current LED box size design is generally about 1 square meter, this is because the LED display box design is too small, it will increase the cost of manufacturers. And it is too big, it is inconvenient to install and splicing.