Five precautions for installing LED display on the seaside and riverside

To choose a high-quality LED display, in addition to considering the quality and reliable service of the display itself, choosing the right LED display product according to different environments and uses is another guarantee. Below we will combine the environment of the seaside and the riverside to briefly choose the LED display. The most notable characteristics of the environment such as the seaside and the riverside are high humidity, strong wind, strong ultraviolet rays, and easy entry of water.

outdoor led display waterproof

1. Humidity
In the later process, excessive humidity will cause the PCB board, power supply, power cord and other components of the LED display to be easily oxidized and corroded, resulting in failure. Therefore, this requires us to do anti-corrosion treatment on the PCB board when making the LED display, such as coating the surface with three-yellow paint, etc. The power supply and power cord should use high-quality accessories, and the welding place is the most likely to be corroded. Pay attention to the protection work, especially the frame, which is easy to rust, it is best to do a good job of anti-rust treatment.

2. Wind
Excessive wind is the most direct impact on the installation of the LED display, so before installing the display, we are required to fully consider the wind factor when we do a force analysis.


3. UV rays
Stronger ultraviolet rays are more likely to cause the aging of the surface of the LED display, thereby reducing its lifespan. The selection of excellent materials when making masks is beneficial to resist the damage caused by ultraviolet rays.

4. Water intake
The usual waterproofing mainly considers rainwater, and the waterproofing of special environments such as seaside and riverside should be considered more comprehensively, and waterproofing measures should be taken from all directions.

5. Perspective
This is a factor that is easily overlooked. In this environment, the viewing angle is usually wider and the audience is wider. When selecting products, the main audience should be fully considered to determine the viewing angle requirements of the display screen.