Hotel Ballroom LED Display Installation Guide
Indoor LED display screens are widely used in various fields because of their good display effect and visual experience, whether they are in station banks, hotel supermarkets, or even monitoring command centers. The installation method of the screen, as well as some matters needing attention in the purchase, make our hotel customers not confused when purchasing and installing the led display.
There are three installation methods for the hotel LED display screen, namely: wall hanging, hoisting and inlaying. The following will introduce the three installation methods to adapt to the environment and the installation steps.
Wall-mounted adaptable environment: The wall must have sufficient load-bearing capacity, and it is easy to use expansion bolts, ordinary bolts or easy-to-weld walls (such as steel structure walls) to facilitate fixing and hanging LED displays on the wall. screen pendant.
Wall-mounted installation steps:
(1) Before installation, it is necessary to know whether the wall has enough load-bearing capacity to fix the display screen;
(2) After confirming that the wall has sufficient load-bearing capacity, according to the actual requirements of the customer (installation position, installation height, left and right distance), carry out actual measurement, make detailed records, and make a scale on the wall. The degree must be clearly marked to better carry out the next step;
(3) Determine the number of pendants to be used according to the height of the LED display screen and mark them well;
(4) Fix the display pendants at both ends. And measure with a horizontal tube to make sure the two pendants are on the same plane. After fixing the pendants at both ends, install other pendants based on the two pendant planes;
(5) After hanging the display screen on the installed pendant, firmly connect the display frame and the pendant with screws;
(6) Inspection: The display screen should be installed horizontally, and the levelness of both ends should not exceed 5mm.
Suitable environment for hoisting: There is no wall around, no indoor LED display with fixed points available, but the roof has enough load-bearing capacity.
Installation steps for hoisting:
(1) Before installation, it is necessary to know whether the roof or other fixed roof has enough load-bearing capacity to fix the LED display;
(2) After confirming that the roof or other fixed roof has sufficient load-bearing capacity, carry out actual measurement according to the actual requirements of the customer (installation position), make detailed records, and do a good job of scale and scale on the roof or other fixed roof. It must be clearly marked to better carry out the next step;
(3) Determine the number of pendants to be used according to the height of the display screen and mark them well;
(4) First fix the display screen hoisting pendants at both ends. And measure with a pull wire. After fixing the pendants at both ends, install the other middle hoisting pendants with these two hoisting pendants as the standard;
(5) After hanging the display screen on the installed hoisting pendant, firmly connect the LED display frame and the hoisting pendant with screws;
(6) Detection: The display screen should be hoisted horizontally, and the levelness of both ends should not exceed 5mm
Applicable environment for mosaic: Displays that need to be concealed
Inlay installation steps:
(1) Before installation, you must know the finished product size of the display screen, and then make the size of the place to be inlaid, which is subject to the finished display screen size.
(2) Put the entire display screen into the place to be inlaid
(3) To fix the display frame, use screws to firmly connect the display frame to the surrounding connections.
(4) The inspection display should be installed flat, and the distance between the plane around the frame and the outer surface of the inlay should be the same. The error should not exceed 5mm
When purchasing a hotel banquet hall LED display, we can consider the following aspects:
(1) Die core: It is generally recommended to use domestically packaged light-emitting diodes for indoor full-color screens, and high-end products are recommended to use Japanese Nichia and American CREE die;
(2) Package form: The advantages of surface mount package 3528, 2121, and 1010 are large viewing angle, good luminous consistency, easy automatic welding and processing, and are the mainstream products of full color screen;
(3) Density: Because the indoor full-color LED chip generates a large amount of heat and the control circuit density is high, the current commercial full-color screen point density cannot be very high;
(4) Drive mode: The drive mode of indoor full-color LED screen is constant current drive, using dynamic scanning mode (mainly 1/4, 1/8, 1/16 and other scanning modes);
(5) Refresh rate: Use a high refresh rate as much as possible to avoid flickering and smearing under camera shooting.
Of course, there are many other factors to consider, such as: brand, price, after-sales service, etc. When purchasing an LED display for a hotel banquet hall, you must comprehensively consider all factors and choose the best and most suitable one for yourself. The product.