ledcoms

LED video wall lighting project how to detect ?

LED video wall is a common decorative material for building urban building lighting projects. It is in the shape of a hollow strip, which has good light transmission, ventilation and lighting effects. Display products, so LED light bar screen can also be called LED hollow screen, LED curtain wall screen, etc. Let the glass curtain wall lighting manufacturers introduce four detection methods for LED video wall faults.

1. LED video wall circuit short circuit detection method

Short circuit fault is a common problem of curtain wall LED light strips in architectural decorative lighting projects. The common detection method is to set the multimeter with alarm function to short circuit detection mode, and then check whether there is a short circuit problem on the LED curtain wall light strip screen. , should be solved as soon as possible; or use the method of connector pins and IC pins to detect, this LED curtain wall screen voltage detection method is simple and efficient. Note that no matter which method above is used, it should be operated with power off to avoid damage to the multimeter. (full color LED display)

2. LED video wall voltage detection method

To detect the voltage of the curtain wall LED screen, you can first set the multimeter of the light bar screen to the voltage level, and then test the lines that may be faulty, and compare the final value with the normal voltage value to obtain the fault range of the LED glass curtain wall screen.

3. LED video wall detection resistance method

In the same way, the detection of the resistance of the LED curtain wall light strip is also to borrow a multi-meter first, and set the measuring instrument to the resistance gear detection. The method is to first detect the resistance value of the normal circuit board from a certain point to the ground, and then take the same value. The circuit board is tested at any point, and the obtained value is compared with the normal resistance value to judge the fault range of the light bar LED curtain wall screen resistance.

4. LED video wall diode voltage drop detection method

The voltage drop detection rule of the LED light bar screen is to set the multimeter to detect the voltage drop. When the current passes through, there will be a voltage drop on the pins. Usually, the voltage drops on the pins of integrated circuits of the same model are the same. We can judge the quality of the diode voltage drop value of the curtain wall LED display according to the pin detection results. Note that the above operations must be performed when the circuit is powered off.

INDOOR LED SCREEN
INDOOR FINE PITCH
_tmp_jZqb2B2BAJM888P8MVcFAQOZ4 (1)
INDOOR ULTRA SLIM
1000x1000led display
OUTDOOR FRONT SERVICE
RENTAL LED DISPLAY5
OUTDOOR 3D DISPLAY
INDOOR LED RENTAL DISPLAY2
INDOOR RENTAL
OUTDOOR LED RENTAL DISPLAY800
OUTDOOR RENTAL
RENTAL LED DISPLAY
RENTAL LED FLOOR
indoor led floor two
FIXED LED FLOOR
TRANSPARENT LED DISPLAY2
FLEXIBLE LED MESH