How to solve the problem of full color led display?

How to solve the problem of full color led display? There are many reasons why the full-color LED display screen cannot be displayed normally. The editor makes a summary on how to solve the full-color LED display screen.

If the new screen is installed and powered on, it may be that the control card is set to scan incorrectly, or the cable is not inserted correctly (check the cable from the control card to the first board). This problem will also occur when the 5V power supply is connected incorrectly.

If this phenomenon is suddenly found after using for a period of time, in addition to the failure of the control card, the biggest possibility is that the board has entered the water and burned the chip or power supply.

You can also try connecting a monitor with a DVI interface first to see if the DVI output port of the graphics card has a normal signal. In general, the resolution of the DVI interface of the Lingxingyu card is 1024*768. The cause of the LED display blurry screen may also be a problem with the graphics card or a driver problem. Try to unplug the network cable of the receiving card behind the display screen and press the debug button on the receiving card to see if the screen scan is normal.

In addition, other reasons for the full color LED display screen are also provided for your reference:

1. The LED display screen cannot be displayed

Solution: Check whether the power supply of the electronic display is normal and whether there is a 220V strong power input

2. The LED electronic display display is abnormal, and the screen is blurred

Solution:

(1) Whether the parameter settings of the LED control card are correct, and whether there is a signal transmitted to the electronic display LED control card;

(2) Whether the communication line is normal, check whether the LED control card has signal input;

(3) Whether the 5V power supply of the LED control card is normal;

3. Part of the screen of the electronic display screen is abnormal, such as black screen, blurred screen

Solution: Check whether the abnormal screen power supply is working normally; the signal transmission line is faulty; the single module of the screen is faulty.

A. There is a problem with the output

1. Check whether the line from the output interface to the signal output IC is connected or short-circuited.

2. Check whether the clock latch signal of the output port is normal.

3. Check whether the cascaded output data port between the last driver IC is connected with the data port of the output interface or is short-circuited.

4. The heat dissipation of the chassis is not good, causing the temperature of the graphics card to rise.

Solution: Eliminate the heat dissipation problem.

Check whether the fan is running normally, add oil to the fan, clean the dust in the chassis, and solve the problem of heat dissipation.

5. Reinstall the system, because the graphics card or monitor does not support high resolution.

Solution:

(1) Restart the computer, press the F8 key continuously, in the advanced startup menu, choose to enter “safe mode” and press Enter to log in to the system, then enter the display settings under Windows, select the 16-color state, click the “Apply” button, and click “OK” ” button.

(2) Restart the computer, in the normal mode of windows, enter the device manager, delete the graphics card driver, and restart the computer.